Fey Goddess Showcase #5

This was printed and painted by OrionDeHunter on Thingiverse! Check him out, he has a ton of amazing painted minis https://www.thingiverse.com/OrionDeHunter/about The materials below can be clicked to bring you to the product. They are Amazon Affiliate links so I will get a small commission from Amazon if you use them.

Printer Brand: Elegoo Mars
Resin: Elegoo Standard Grey resin

Slicer Settings
Layer Height: .04 mm,
Bottom Layer Count: 6
Exposure Time: 10s
Bottom Exposure Time: 60s
Slicer Used: ChiTuBox V1.5.0
Print Orientation: Vertical (i.e., no rotation)